- Removes calcium carbonate deposits
- Contains an indicator to indicate exhaustion and when cleaning is complete
- May be used on stainless steel equipment
Safe Acid Powder is an acidic cleaner which is specifically designed to remove calcium carbonate, calcium phosphate or zinc phosphate deposits from metal surfaces. For aluminium surfaces use “Safe Scale Remover“.
Typical Applications
After cleaning, equipment should be thoroughly rinsed with water and then rinsed with a neutralising solution such as sodium carbonate solution, and then thoroughly rinsed with water again.. Do not leave equipment wet or damp after cleaning as “after rusting” may occur.
Treatment and Feeding Requirements
Proper treatment levels of Safe Acid Powder depend on many factors, such as quantity, composition and nature of deposits and conditions particular to a given installation. Typically the product would be applied at a solution concentration of between 5% and 10% of Safe Acid Powder. The product should be used in accordance with control procedures that GE Water & Process Technologies establishes for a specific application.
Equipment recommendations are available upon request.
General Properties
Physical properties of Safe Acid Powder are shown on the Safety Data Sheet, a copy of which is available upon request.
Packaging Information
Storage
Store Safe Acid Powder at moderate temperatures in a dry area and protect from moisture. Store away from alkaline chemicals.
Safety Precautions
A Safety Data Sheet containing detailed information about this product is available upon request.